Oil Injector For R-12

Robinair 16258 R-12 Oil Injector with 1/4" SAE Fitting

• Note: Image shows Robinair part numbers 16258 for R-12 and 16256 for R-134a, which are available separately.
• Use this syringe-type injector to add oil to a fully pressurized A/C system.
• Just fill the barrel with the amount of oil needed (measurements are marked on the barrel body). Connect the injector fitting to the low side access port on the vehicle and press the plunger to deliver the oil charge.
• Ideal for vehicles and small A/C systems.
• Check valve prevents any back flow of refrigerant.
• Maximum capacity is 1/2 ounce.
• *Not recommended for UV dye injection.