Enclosed Feed Tubing Cutter (1-1/8")

General Tools & Instruments | Enclosed Feed Tubing Cutter (1-1/8") | 128 | Enclosed Feed Tubing Cutter (1-1/8")  128

Key Features

• Self-contained adjustable feed prevents tool length from increasing when cutting larger diameter pipe
• Cutting feed retracts into the handle body, sealing out dirt and protecting the cutting wheel from damage during storage
• Large, fly-wheel adjusting knob sends cutter to rollers in one revolution for lighting-fast adjustments
• Lightweight, aluminum body is designed to meet government tool standards for size and weight

Applications

• This tubing cutter is ideal for cutting copper, aluminum, brass, and thin-wall stainless steel up to 3/16" thickness
• It can be used on both rigid and flexible tubing
• The enclosed feed allows for consistent tool length when working in confined spaces

Benefits

• The enclosed feed prevents the tool from becoming too long, which can be a problem when working in tight spaces
• The cutting feed retracts into the handle body, which helps to protect the cutting wheel from damage
• The large, fly-wheel adjusting knob makes it easy to make quick and precise adjustments
• The lightweight, aluminum body makes this tubing cutter easy to use and maneuver

Instructions

• To use the tubing cutter, first position it around the pipe and tighten the knob until the pipe is snug between the blade and rollers.
• Turn the knob an extra one-half revolution for the first cut.
• Spin the tubing cutter around the pipe, making complete revolutions. Do not spin the cutter back and forth as this may bend the pipe.
• As the tool begins to cut the pipe, tighten the knob to keep pressure on the cutting surface.
• Continue spinning the cutter and tightening the adjustment knob until the pipe is cut.
• Use a reamer to remove any burrs formed on the surface of the pipe.

FAQs

• Q: How much pressure should I apply when tightening the cutter?
• A: As a general rule, you should keep the cutter hand-tight at all times. If the tool is too tight, it will be difficult to turn around the pipe. If it is too loose, the cutter will spin too easily and will not make sufficient contact with the cutting surface. Retighten the knob after every full rotation of the cutter.
• Q: Which replacement blade should I use with this cutter?
• A: This cutter uses RW122 replacement blades.