Insta-Bond Accellerator

SEM Products 39322 Insta-Bond Accellerator is a liquid that speeds the curing process of SEM Products 39311 Insta-Bond Adhesive. It is a clear, colorless liquid with a low viscosity. It is non-flammable and non-toxic.

Key Features

• Speeds the curing process of SEM Products 39311 Insta-Bond Adhesive
• Clear, colorless liquid with a low viscosity
• Non-flammable and non-toxic

Applications

SEM Products 39322 Insta-Bond Accellerator is used to speed the curing process of SEM Products 39311 Insta-Bond Adhesive. It is used in a variety of applications, including:

• Bonding metal to metal
• Bonding plastic to plastic
• Bonding rubber to rubber
• Bonding ceramic to ceramic

Benefits

Using SEM Products 39322 Insta-Bond Accellerator can provide a number of benefits, including:

• Faster curing time
• Increased strength of the bond
• Improved resistance to moisture and chemicals
• Reduced shrinkage

How to Use

To use SEM Products 39322 Insta-Bond Accellerator, follow these steps:

1. Apply SEM Products 39311 Insta-Bond Adhesive to the surfaces to be bonded.
2. Allow the adhesive to dry for the specified amount of time.
3. Apply SEM Products 39322 Insta-Bond Accellerator to the adhesive.
4. Allow the accelerant to dry for the specified amount of time.

The surfaces should be bonded together within 24 hours.

Safety Precautions

SEM Products 39322 Insta-Bond Accellerator is a non-flammable and non-toxic liquid. However, it is still important to take precautions when using it, such as:

• Wearing gloves to protect your hands
• Avoiding contact with eyes and skin
• Using in a well-ventilated area
• Keeping out of reach of children

Storage

SEM Products 39322 Insta-Bond Accellerator should be stored in a cool, dry place. It should be kept away from heat and direct sunlight.

For more information, please visit our website.