Bahco | Auger Bits - Short - 7/8 | 9526-7/8 | Auger Bits - Short - 7/8

The Bahco 9526-7/8 Auger Bit is a heavy-duty bit designed for drilling holes in wood. It features a self-tapping tip that makes drilling easier, and a hollow center flute that allows the chips out of the hole easier, resulting in a cleaner cut. The hex shank prevents slipping in the chuck.

Key Features

• Overall length 16", twist length 12
• Heavy duty cutting edge
• Tip is self-tapping which makes drilling easier
• Hollow center flutes allow the chips out of the hole easier allowing for a cleaner cut
• Hex shank prevents slipping in chuck

Applications

The Bahco 9526-7/8 Auger Bit is ideal for drilling holes in wood for a variety of applications, including:

• Installing door hinges
• Installing window locks
• Drilling pilot holes for screws
• Drilling holes for dowels
• Drilling holes for electrical wiring

Benefits

The Bahco 9526-7/8 Auger Bit offers a number of benefits over other auger bits, including:

• Heavy-duty construction for long life
• Self-tapping tip makes drilling easier
• Hollow center flutes allow for a cleaner cut
• Hex shank prevents slipping in the chuck

How to Use

To use the Bahco 9526-7/8 Auger Bit, follow these steps:

1. Select the correct size auger bit for the hole you need to drill.
2. Clamp the workpiece securely to a workbench.
3. Insert the auger bit into the chuck of a power drill.
4. Turn on the power drill and slowly apply pressure to the auger bit.
5. Continue drilling until the hole is the desired depth.

Troubleshooting

If you are having trouble drilling a hole with the Bahco 9526-7/8 Auger Bit, here are a few troubleshooting tips:

• Make sure the auger bit is sharp.
• Make sure the auger bit is the correct size for the hole you need to drill.
• Make sure the workpiece is securely clamped to a workbench.
• Slowly apply pressure to the auger bit as you drill.

Storage

When not in use, store the Bahco 9526-7/8 Auger Bit in a dry, well-ventilated area.