Stant, Inc | System Testing Adapter - 32mm ID | 12027 | System Testing Adapter - 32mm ID
Features:
- Required to test all small diameter (32mm ID 16mm deep) cooling system filler neck applications (vehicles using the Stant No. 10227 & No. 10233 radiator caps.)
Applications:
- All small diameter (32mm ID 16mm deep) cooling system filler neck applications (vehicles using the Stant No. 10227 & No. 10233 radiator caps.)
Benefits:
- Allows for the testing of cooling system pressures without removing the radiator cap.
- Prevents the escape of coolant when testing the cooling system pressure.
- Easy to use and install.
Instructions for Use:
- Remove the radiator cap from the vehicle.
- Insert the system testing adapter into the radiator filler neck.
- Connect the pressure gauge to the system testing adapter.
- Inflate the cooling system to the desired pressure.
- Observe the pressure gauge to ensure that the cooling system is holding pressure.
- Once the test is complete, release the pressure from the cooling system and remove the system testing adapter.
Cautions:
- Do not exceed the maximum pressure rating of the cooling system.
- Do not operate the engine while the cooling system is under pressure.
- Always wear safety glasses when working on a vehicle.
Note:
This product is not a replacement for a radiator cap. It is only intended for use in testing the cooling system pressure.
Follow us on social media