J410S - 0" - 10" Standard Service Deep Throat
Splatter-Resistant C-Clamp
| Features
and Benefits |
- Forcing screw and pad
are plated with copper to resist spatter
- Hot forged for
strength and hard use
- Forcing screw has
heavy rolled Acme thread allowing the screw to turn easily under
pressure and is less susceptible to damage
- Forcing screw has a
sliding T handle and an impact resistant pad
|
|
|
| Weight |
10.5 lbs |
| Opening Range (C) |
0 to 10 |
| Screw Diameter (D) |
3/4 |
| Throat Depth (T) |
5-3/8 |
| Minimum Test Load |
6,200 Lbs. |
| Specifications |
CID A-A-429C |
|
Warranty
- Use safety goggles, serious
eye injury is possible
- Do not use a damaged
c-clamp, replace bent screws and missing pressure pads
- Do not use c-clamps to pull
or lift
- Disconnect electricity when
working on electrical parts
- Instructions: Apply clamping
force perpendicular, engage pressure pad and anvil fully, prevent
slipping, keep tools clean, and maintain your balance
Stanley
Proto Industrial Tools PO
J410S 0" - 10" Standard Service Deep Throat
Splatter-Resistant C-Clamp POJ410S
Follow us on social media