The pull spindle with quick-action clamping nut is used in conjunction with the tools of the KL-0039-.. Series and the KL-0040-2500 hydraulic cylinder (17t) to allow bearings, bushings, joints etc. to be removed and installed hydraulically. Thanks to its special design, the quick-action clamping nut can be adjusted simply by sliding it on the pull spindle without any rotational movement. This allows for short assembly/clamping times as well as quick and easy adjustment and simple operation of the tool. For removing and installing bearings, bushings, etc. Thanks to its special design, the quick-action clamping nut can be adjusted simply by sliding it on the pull spindle without any rotational movement. This allows for short assembly/clamping times as well as quick and easy adjustment and simple operation of the tool. To prevent the quick-release nut from opening under load, secure it by the collar together with a suitable pressure/support sleeve, an adapter, or a retaining ring. o For the hydraulic drive of the KL-0039 series
o High time saving due to quick-clamping function of the nut
o Only in combination with hydraulic cylinder KL-0040-2500 Code: 2915375 | Part No.: KL-0039-2112 | Thread: M12 | Thread (2): M20 | Drive (hex): 13,0 mm | Load (max.): 7 t | Spindle length (total): 590 mm | Thread length: 210 mm | Thread length (2): 300 mm | Drive type: hydraulic | Weight: 950 g
Follow us on social media