Solenoid Testing Kit

Kent-Moore KM J-44246 Solenoid Testing Kit

The Kent-Moore KM J-44246 Solenoid Testing Kit is a fast and efficient way to test electronic shift solenoids. It is designed for use on 1993 and newer vehicles. The kit includes a fixture, a solenoid, and a set of instructions.

Key Features

• Fixture holds solenoid in place for testing
• Solenoid is pre-wired for easy installation
• Instructions include step-by-step testing procedures

Applications

The Kent-Moore KM J-44246 Solenoid Testing Kit is designed for use on 1993 and newer vehicles with electronic shift solenoids. It is compatible with a variety of makes and models.

Benefits

• Fast and efficient way to test electronic shift solenoids
• Fixture holds solenoid in place for testing
• Solenoid is pre-wired for easy installation
• Instructions include step-by-step testing procedures

How to Use

To use the Kent-Moore KM J-44246 Solenoid Testing Kit, follow these steps:

1. Remove the shift solenoid from the vehicle.
2. Place the solenoid in the fixture.
3. Apply shop air to the solenoid.
4. Apply 12 volts and a ground to the solenoid to activate it.
5. If an air leak is detected, the solenoid is defective.

Troubleshooting

If the solenoid is defective, it will need to be replaced. To replace the solenoid, follow these steps:

1. Remove the old solenoid.
2. Install the new solenoid.
3. Reconnect the electrical connectors.
4. Start the engine and verify that the solenoid is working properly.

To learn more about the Kent-Moore KM J-44246 Solenoid Testing Kit, visit our website at www.kentmoore.com.