SuperMUTT Trailer Tester with Standard Equipment

Features and Benefits:

• Perform leak down test on service and emergency lines
• Adjust slackers and measure pushrods using remote control
• Power lights individually, all at once, via auto scan or remote control
• Pulses power to shorted and overloaded circuits (patented Pulsar®  technology)
• ABS fault codes via Aux and brake circuit activation (i.e. Wabco/Bendix Tab-6 systems)
• Includes: remote control, 5 ft. 7 way cable, chassis ground cable, external battery connector, 6 ft. glad hands

The Super MUTT® places a load on the trailer’s electrical circuits to identify wiring problems while providing remote control operation over both air brakes and lights. Built to facilitate a one-man testing operation, the Super MUTT® reduces guesswork and inspection time to prevent failures that lead to expensive road calls and citations. The remote control allows for repetitive air brake actuation at each axle to reveal developing problems often missed by normal testing procedures. Battery Not Included.

The most advanced Super MUTT® to date includes such features as a mute bypass switch and internal regulator.

AIR BRAKE TESTING

• Performs leak down test on service and emergency lines
• Observe slacker adjustment in real time
• Activates air brakes by remote control

ELECTRICAL TESTING

• Pulsar® mode, cross, open, overloaded and shorted circuit indication
• Amperage readout; audible and visible alerts
• 7 way cable testing
• Access ABS blink codes
• Activates lights by remote control

REMOTE CONTROL

• One-man testing
• Real-time servo on/off engagement
• Programs multiple remotes; 100 ft. range