Conventional Paint Spray Guns
A paint spray gun uses compressed air to break paint into a fine mist and lay it on the panel in an even coat. This category carries spray guns for automotive refinishing and other painting work, along with nozzle sets, needle and air cap combinations and spray gun parts. Collision and body shops, restoration shops, fleet and equipment paint shops and serious hobby painters use them for primer, base coat, clear coat and single stage finishes.
Choosing the right type
Conventional guns use higher air pressure to atomize paint, which gives a fine finish but sends more material into the air as overspray. Gravity feed guns hold the cup on top and use less paint, while siphon feed guns draw from a cup below and hold more material. This category also includes some guns that run at reduced pressure; check each product name, and see HVLP Guns, LVLP Guns and Gravity Feed Guns for those types. Touch-up and detail guns handle small areas and jambs.
Nozzles and set-up
The fluid tip, needle and air cap work as a set, and their size should match the material: thinner materials such as base coat and clear generally use smaller tips, and thicker primers use larger ones. Follow the paint maker data sheet for tip size and inlet pressure. Replacement nozzle sets and parts keep a gun spraying a clean pattern.
Using and cleaning
Check the spray pattern on masking paper before painting, keep the gun square to the panel at a steady distance, and overlap each pass evenly. Clean the gun right after use, since dried material in the passages ruins the pattern. Spray in a booth or well-ventilated area with proper respiratory protection.
Brands we carry
Spray guns here come from SATA, 3M, Iwata, DeVilbiss and Astro Pneumatic, with more from Fuji Spray and Sharpe.

















































Follow us on social media