The Kent-Moore J-39855 Stator Shaft Seal Installer is a three-piece tool that is used to install and size the stator shaft solid o-rings in 4L60 and 4L60E transmissions. The tool consists of a seal protector, a seal installer (pusher), and a seal sizing tool.
Key Features
- Three-piece tool
- Used to install and size the stator shaft solid o-rings in 4L60 and 4L60E transmissions
- Includes a seal protector, a seal installer (pusher), and a seal sizing tool
Applications
- 4L60 and 4L60E transmissions
Benefits
- Properly installs and sizes the stator shaft solid o-rings
- Prevents damage to the o-rings
- Ensures a leak-free seal
Instructions for Use
- Align the seal protector with the stator shaft.
- Insert the seal installer (pusher) into the seal protector.
- Drive the seal installer (pusher) into the stator shaft until the seal is fully seated.
- Use the seal sizing tool to verify that the seal is the correct size.
Warnings
- Do not use the tool on transmissions that are not listed in the applications section.
- Use caution when driving the seal installer (pusher) into the stator shaft.
- Do not overtighten the seal installer (pusher).
To learn more about the Kent-Moore J-39855 Stator Shaft Seal Installer, please visit our website or contact us at 1-800-555-1212.
Follow us on social media