Nylon Bristle Brush

Nylon Bristle Brush 403

Use for light deburring, cleaning and polishing of silverware, jewelry and other precious metals. Can be used with polishing compound.

Ideal for general cleaning and polishing-especially in hard-to-reach places, such as slotted surfaces
Long-wearing nylon bristles

User Tips

For best results, insert the accessory bit all the way into the tool and then back it out slightly before tightening down. This provides plenty of shank for the collet or chuck to hold onto the bit.
Keep a light touch, letting the tips of the brush do the work. Too much pressure can break the bristles.
Before using on a material, allow the tool with brush to run at operating speed for at least one minute to discharge any loose bristles. Make sure no one stands in front of or in line with the brush.
The bristle brush can be used with polishing compound.
Do not run in excess of 15,000 rpm. Therefore, do not use with a Single-Speed MultiPro Rotary Tool or a Heavy-Duty Flex-Shaft Tool unless you use the #221 Foot Speed Control

    * bit diameter inch: 3/4"
    * bit diameter mm: 19,1 mm
    * color code: Yellow
    * description: Bristle Brush
    * shank diameter: 1/8", 3,2 mm
    * Model Number:403

Dremel 403 Nylon Bristle Brush

Other products
Dremel Homepage
Model: 144893
Manufacturers Part #: 403
Manufactured by: Dremel
Also Known As: DE403