Line Up Pin For 10540

Dynabrade 95971 Line Up Pin For 10540

The Dynabrade 95971 Line Up Pin For 10540 is a precision-machined tool that is used to align and position the tip of a Dynabrade 10540 abrasive wheel. The pin is made of hardened steel and features a 1/4-inch diameter shank that fits into the chuck of a power drill. The pin has a 1/8-inch diameter tip that is tapered to a point. The tip is designed to fit into the center hole of the abrasive wheel.

Key Features:

• Precision-machined hardened steel construction
• 1/4-inch diameter shank
• 1/8-inch diameter tapered tip
• Fits Dynabrade 10540 abrasive wheels

Applications:

The Dynabrade 95971 Line Up Pin For 10540 is used to align and position the tip of a Dynabrade 10540 abrasive wheel. The pin is used to ensure that the wheel is properly centered on the workpiece and that the wheel is not tilted. The pin can also be used to help prevent the wheel from slipping off the workpiece.

Benefits:

• Ensures that the abrasive wheel is properly aligned and centered
• Helps to prevent the wheel from slipping off the workpiece
• Allows for faster and more accurate wheel changes

Instructions for Use:

1. Insert the pin into the chuck of a power drill.
2. Align the tip of the pin with the center hole of the abrasive wheel.
3. Turn on the drill and press the tip of the pin against the workpiece.
4. The pin will help to hold the wheel in place while you tighten the wheel onto the spindle.

Warnings:

• Always wear safety glasses when using this tool.
• Do not use the tool if it is damaged.
• Keep the tool out of reach of children.