Brake Cylinder Flex-Hone - 2-1/8 x 8 In - 320 Grit

2-1/8" x 8" Brake Cylinder Flex-Hone - 320 Grit

Features:

• Silicon carbide abrasive type.
• A resilient, flexible honing tool with a soft cutting action.
• The abrasive globules each have independent suspension that assures the Flex-Hone(R) to be self-centering, self-aligning to the bore, and self-compensating for wear.

Applications:

• Used to hone brake cylinders.

Benefits:

• Provides a smooth, uniform finish on the cylinder bore.
• Helps to improve brake performance.
• Reduces brake noise.
• Extends the life of brake components.

How to Use:

1. Inspect the brake cylinder for any damage.
2. Clean the brake cylinder with a degreaser.
3. Apply a light coat of honing oil to the Flex-Hone(R).
4. Insert the Flex-Hone(R) into the brake cylinder and hone the bore in a back-and-forth motion.
5. Repeat steps 3 and 4 until the desired finish is achieved.
6. Remove the Flex-Hone(R) from the brake cylinder and clean the bore with a degreaser.

Cautions:

• Do not use the Flex-Hone(R) on a brake cylinder that is damaged.
• Do not use the Flex-Hone(R) on a brake cylinder that is overheated.
• Do not use the Flex-Hone(R) on a brake cylinder that is wet.
• Do not use the Flex-Hone(R) on a brake cylinder that is not properly lubricated.

Storage:

Store the Flex-Hone(R) in a cool, dry place.