Combination Brake Lathe - Only

• Twin cutter tools and quick drum-to-rotor changeover.
• Adjustable spindle speeds (if desired) allow for quick rough cut/finish cut settings.
• Infinitely adjustable spindle-feed gear box.
• User-friendly ergonomics.
• Supports drums or rotors up to 100 lbs. using the standard one inch (25.4mm) arbor, or up to 200 lbs.using the optional 1.875 inch (47.63mm) arbor.

Specifications:

• Rotor Diameter: 14.5"
• Max. Rotor Face Width: 3.75"
• Max. Rotor Thickness: 1.75"
• Drum Capacity (Diameter): 6"-28"
• Flywheel Diameter (Flat or Stepped): 17.5"
• Flywheel Face Width: 3.75"
• Drum, Rotor, Flywheel Max. Weight : 100 lbs.
• Spindle Speed: 100, 200 RPM
• Rotor Feed Rate: .002"/ .010"/REV
• Drum Depth: Up to 6.875"
• Drum Feed Rate: 002" to .020"/REV
• Motor: 1 HP
• Shipping Weight: 406 lbs.
• Warranty: 1 yr.
• Spindle Bearings: Bronze sleeve
• Standard Tool Bits: Negative rake
• Arbor Taper: Double

**NOTE - This model (4000B) requires one of the following Adapter Kits at an additional cost. Select the kit that best fits your shops needs.

GOOD: Model 1A Hub & Hubless Adapters for Most Cars

BETTER: Model 2B Hub & Hubless Adapters for Cars and Trucks thru 1/2 Ton

BEST: Model 3C Hub & Hubless Adapters for Cars & Trucks thru 1 Ton

10 Day Lead Time for Manufacturer Drop-Ship plus Transit Time

$85 standard freight fee. Applies to direct shipping points within the 48 continental US states. Rural Area Surcharge may apply.

• *An additional $40.00 will apply to all residential deliveries of heavy-equipment.
• *For lift-gate service, add $135.00.

Ammco 4000B Combination Brake Lathe