Christie now offers a portable,
inductive amp-probe. The amp-probe is designed to work in conjunction
with Christie battery load testers for checking charging system /
alternator current output.
The AP600 is accurate to 100 ma and
has auto-ranging for 40A, 400A, and 600A. It can be used for measuring
parasitic draw and for trouble-shooting various electrical problems. It
also features Auto-Zero and Auto-Hold functions.
Operation is simple: Clamp it on,
press the auto-zero button, and read the current measurement.
Charging
System / Alternator test
The AP 600 is designed to be used with a Christie carbon pile battery
load tester (CT 500 or CT 800) for complete charging system analysis.
600
Amp Auto Range Capacity
Three current measurement ranges are provided: 40A, 400A, and 600A.
These ranges are automatically selected by the AP600. Operation is
simple. Clamp it on, press the auto-zero button, and read the current
measurement.
Precision
Accuracy
The AP600 is accurate to 100 ma. It uses a 9 volt battery with
typically 50 hours of expected life. Dimensions: 7.7" H x 2.8" W x 1.2"
D.
Auto
Zero
Christie's new amp-probe has a "auto-zero" button rather than a pot
adjustment to expedite testing.
Protective
Tether
The AP600 comes with a tether attached that can be fastened to a tester
or tester stand so that the probe will not be misplaced or left under
the hood of a vehicle being serviced.
Dimensions:
- Heigh:t 7.7 in.
- Width: 2.8 in.
- Depth: 1.2 in.
Follow us on social media