Da Mfiber Cutting Pad 3" 2pk

Meguiar's DA Mfiber Cutting Pad 3" 2pk | DMC3

Features and Benefits:

• Cuts through moderate surface defects with no swirls
• Foam interface provides optimal cutting efficiency and controlled conformability
• Machine washable

Applications:

• Use with a dual-action (DA) polisher to remove light to moderate swirl marks and scratches from painted surfaces.
• Can also be used with a rotary polisher, but care should be taken to avoid overheating the paint.

Benefits:

• The Meguiar's DA Mfiber Cutting Pad is a high-performance pad that can cut through moderate surface defects with no swirls.
• The foam interface provides optimal cutting efficiency and controlled conformability, so you can be confident that you're getting a professional-quality finish.
• The pad is also machine washable, so you can keep it clean and ready to use for your next project.

How to Use:

1. Apply a small amount of polish to the pad.
2. Clamp the pad onto the polisher and turn it on to a low speed.
3. Work the polish into the surface of the paint in a circular motion.
4. Increase the speed of the polisher as needed to remove the defects.
5. Wipe down the surface with a clean microfiber towel to remove any residual polish.

Warnings:

• Be careful not to overheat the paint when using a rotary polisher.
• Always use a lubricant when polishing your car.
• Test the pad on an inconspicuous area of the car before using it on the entire surface.

Meguiar's DA Mfiber Cutting Pad is a great choice for anyone looking for a high-performance pad that can cut through moderate surface defects with no swirls. The pad is easy to use and produces professional-quality results.