INTERFACE PAD

Dynabrade | INTERFACE PAD | 53980

Features and Benefits:

• 1/2" thick foam, for random orbital sanders
• Attaches between sanding pad and hook-face abrasive
• Soft foam increases conformability allowing operator to easily follow contours
• Converts standard pad into a fine finishing and finessing pad
• Interface pad easily contours to most surfaces

Applications:

• Used with random orbital sanders to create a smooth, even finish on a variety of surfaces, including wood, metal, and plastic.
• Ideal for fine finishing and finessing work.
• Can be used with a variety of abrasives, including hook-and-loop, PSA, and water-based abrasives.

Benefits:

• Improves the finish of your work by creating a smooth, even surface.
• Reduces the amount of time and effort required to sand a surface.
• Makes it easier to follow contours and create complex shapes.
• Can be used with a variety of abrasives, making it a versatile tool for a variety of applications.

How to Use:

1. Attach the interface pad to the sanding pad of your random orbital sander.
2. Select the appropriate abrasive for your project.
3. Begin sanding the surface, using light pressure and a consistent motion.
4. Continue sanding until the desired finish is achieved.

Tips:

• Use a fresh interface pad for each project to ensure the best results.
• Clean the interface pad regularly to prevent it from becoming clogged with dust and debris.
• Replace the interface pad when it becomes worn or damaged.

Troubleshooting:

• If the interface pad is not conforming to the surface, try using a thinner or thicker pad.
• If the interface pad is causing the abrasive to tear, try using a different type of abrasive.
• If the interface pad is not creating a smooth finish, try using a different grit of abrasive.

Warnings:

• Always wear safety glasses when using a random orbital sander.
• Keep the sander away from children and pets.
• Do not use the sander in wet or damp conditions.