1/2" DRIVE IMPACT SOCKET 7/16" - 8 POINT

• Drive end chamfer and four detents help provide quick positive engagement with drive tool on any of the socket drive walls.
• Tight tolerances for snug fit on fastener.
• Large clearance holes, concentric opening and nut end chamfer make it easy to position socket on fasteners.
• Made from high-strength steel to help minimize wall thickness and provide access to fasteners in recesses and where nuts and bolts protrude.
• Impact sockets are used wherever powered drive tools are used to install or remove fasteners.
• Impact sockets are designed to withstand higher torque and force associated with impact tools in repetitive application.
• Proto® 8 Point Impact Sockets are ideal for use on stubborn or damaged fasteners, and also on fasteners made from soft materials.
• The TorquePlus™ design is a high performance drive configuration which allows for quick and easy socket engagement to the fastener flats, not the corners.
• The TorquePlus™ configuration employs a radius-corner design, shifting contact area and stress away from the fastener corners and distributing contact stresses over a large area of the socket, minimizing slippage.
• The TorquePlus™ internal design minimizes fastener rounding, helps to extend fastener life, and allows the user to more easily turn worn, rounded, or rusted fasteners.
• Socket size stamped on tool for easy identification.
• Side locking hole.

SIZE [IN]7/16

NUT END OUTSIDE DIAMETER [IN]53/64

DRIVE END OUTSIDE DIAMETER [IN]15/16

NUT DEPTH [IN]19/64

BOLT CLEARANCE DEPTH [IN]27/32

OVERALL LENGTH [IN]1-1/2

WEIGHT [LBS]0.18

DRIVE SIZE [IN]1/2POINT SIZE8

FINISH Black Oxide

LENGTH TYPE Standard

UNIT OF MEASURE Fractional

SPECIFICATION ASME ASME B107.110-2012