6" FOAM INTERFACE PAD- PK OF 2

**Norton Company | 6" FOAM INTERFACE PAD- PK OF 2 | 02162 | **

Key Features

• 6" x 9" x 1/4" thick
• Closed cell foam
• Water resistant
• Conforms to uneven surfaces
• Reduces vibration and noise
• Improves adhesion

Applications

• Used between tiles and substrates to create a level, smooth surface
• Ideal for use on uneven surfaces, such as concrete, plywood, and drywall
• Can also be used to reduce vibration and noise

Benefits

• Improves the adhesion of tiles to the substrate
• Reduces the risk of cracking and chipping
• Creates a level, smooth surface that is easy to clean
• Helps to reduce noise and vibration

Product Description

The Norton Company 6" Foam Interface Pad is a water-resistant, closed cell foam that is used between tiles and substrates to create a level, smooth surface. The pad conforms to uneven surfaces and helps to reduce vibration and noise. It also improves the adhesion of tiles to the substrate, reducing the risk of cracking and chipping. The pad is easy to install and can be used on a variety of surfaces, including concrete, plywood, and drywall.

The Norton Company 6" Foam Interface Pad is a versatile and effective product that can help you to create a beautiful and durable tile installation.

How to Use

1. Prepare the substrate by making sure that it is clean, dry, and level.
2. Cut the pad to the desired size.
3. Place the pad between the tile and the substrate.
4. Apply mortar to the back of the tile and press it into place.
5. Allow the mortar to dry completely.

Troubleshooting

If the tiles are not adhering properly to the substrate, you may need to apply more mortar or use a different type of pad. If the pad is not conforming to the uneven surface, you may need to cut it to a smaller size or use a different type of pad.

FAQ

Q: What is the difference between a foam interface pad and a thinset mortar bed?

A: A foam interface pad is a thin, flexible sheet of foam that is placed between the tile and the substrate. It helps to level the surface and reduce vibration and noise. A thinset mortar bed is a layer of mortar that is applied to the substrate before the tile is installed. It provides a strong bond between the tile and the substrate.

Q: Can I use a foam interface pad on any type of surface?

A: No, you should only use a foam interface pad on a smooth, level surface. If the surface is uneven or rough, you should use a different type of pad or a thinset mortar bed.

Q: How long does it take for the mortar to dry?

The drying time for mortar will vary depending on the type of mortar and the conditions in the area. Generally, it will take between 24 and 48 hours for the mortar to dry completely.

Q: How do I clean the foam interface pad?

You can clean the foam interface pad with a mild detergent and water. Be sure to rinse the pad thoroughly and dry it completely before using it again.