Fluid Nozzle for SRiPro Spot Repair Gun SRIPRO-200-08-K

• *Includes (1) SRIPRO-2 separator
• Non-stock item, backorder status

NOTE: When replacing the fluid nozzle or fluid needle, replace both at the same time. Torque to 80-90 in-lbs (9-10 Nm). Don't over tighten the fluid nozzle. Use SRI-50 (6mm) wrench supplied with the gun and check with a torque wrench.

IMPORTANT NOTE: The SRI PRO and old SRI fluid nozzles and aircaps ARE NOT INTERCHANGEABLE between the 2 models. Any attempt to fit fluid nozzles or caps onto the wrong Spray Gun may cause damage to the parts or the Spraygun body and invalidate the warranty.

DeVilbiss 803298 Fluid Nozzle SRIPRO-200-08-K for SRiPro Spot Repair Gun