2-arm bearing puller "Cobra" 90 x 100 mm with side clamp

The 2-jaw puller "Cobra" with side clamp and separating claw is used for pulling flush-mounted ball bearings, bearing rings, and workpieces. The special claw shape of the puller jaws grips underneath the part to be pulled when tightening the clamp and loosens it already before the actual pulling process. At the same time, the clamp increases the pressing force of the puller jaws manifold and thereby prevents slippage of the puller. By tightening the clamp, the sharp claws of the puller jaws grip under the part to be pulled and release it, already before the actual pulling process. The freely movable pin on the T-handle guarantees comfortable, one-handed tightening of the spindle in tight spaces.
Integrated, freely movable pen on the T-handle guarantees manual spindle drive in the tightest of spaces.
The side clamp ensures that the puller jaws are pressed particularly tightly against the part being pulled off.