2-jaw puller for roller bearings, swedish model

Kukko Quality Tools Inc | 2-jaw puller for roller bearings, Swedish model | 112-2 | 2-jaw puller for roller bearings, Swedish model

Key Features

• Two-jaw puller for roller bearings
• Swedish design
• Forged steel construction
• Hardened and ground jaws
• Precision ground bearing surfaces
• Reversible jaws
• Swivel head for easy positioning
• Heavy-duty construction for long life

Applications

The Kukko 2-jaw puller for roller bearings is used to remove bearings from shafts. It is ideal for use on bearings with a diameter of up to 2 inches. The puller is also suitable for use on bearings with a shoulder.

Benefits

The Kukko 2-jaw puller for roller bearings offers a number of benefits, including:

• Precision ground bearing surfaces: The precision ground bearing surfaces ensure that the puller will not damage the bearing during removal.
• Reversible jaws: The reversible jaws allow the puller to be used on bearings with either a left-hand or right-hand thread.
• Swivel head: The swivel head allows the puller to be positioned easily for maximum leverage.
• Heavy-duty construction: The heavy-duty construction of the puller ensures that it will withstand the rigors of everyday use.

How to Use

To use the Kukko 2-jaw puller for roller bearings, follow these steps:

1. Align the jaws of the puller with the bearing.
2. Insert the puller into the bearing until the jaws are snug against the inner race.
3. Tighten the set screws to secure the puller in place.
4. Apply pressure to the handle of the puller to remove the bearing from the shaft.

Troubleshooting

If the bearing is difficult to remove, try the following:

• Apply more pressure to the handle of the puller.
• Use a penetrating oil to loosen the bearing.
• Heat the bearing to make it more pliable.

Care and Maintenance

To keep the Kukko 2-jaw puller for roller bearings in good condition, follow these tips:

• Clean the puller with a mild detergent and water after each use.
• Dry the puller thoroughly before storing it.
• Lubricate the jaws of the puller with a light oil to prevent rust.

Technical Specifications

• Jaw width: 1 inch
• Jaw length: 1.5 inches
• Maximum bearing diameter: 2 inches
• Weight: 2 pounds