Multi-side bolt puller set, up to 150 mm spread and 205 mm reach

The multi-side bolt puller set K-68-B is used for pulling components with threaded holes. The tension and pressure set impresses with the KUKKO Power Nut Technology integrated into the crossbar, which allows for the exertion of force that would otherwise only be achievable through hydraulics. The position of the Power Nut can be immediately changed with the push of a button. When the Power Nut is mounted above the crossbar, increased tension force is achieved. If the Power Nut is positioned below the crossbar, the pressure force is enhanced. Three small magnets are attached to the foot of the crossbar to align and fix the Power Nut. The multi-crossbar allows the attachment of up to three side screws for a more even force distribution. For precise adjustment assistance, a scale with numerical values is located on the crossbar. Various pressure pieces can be used for individual adaptation to the shaft.
The sentence covers a variety of common standard threads for adapting the puller device.
The multi-traverse of series 68 allows for the removal over two or three threads in the component to be disassembled.