6" CYCLONIC MULTI AIR DISCS 500GR 50/PK

Norton Company | 6" CYCLONIC MULTI AIR DISCS 500GR 50/PK | 07785

Features and Benefits:

• Innovative cut hole-pattern to maximize performance
• Nearly twice as many hole as the original multi-air design to better target dust
• Patented design retains a higher percentage of abrasive coverage compared to the original multi-air
• Does not need to be lined up with the holes on the back-up pad to achieve optimal performance so changeover is fast and easy
• Best results will be achieved using a vac-assist random orbital sander

The sharp, cool-cutting ceramic grain performs well on conventional paints and primers as well as hard-to-sand surfaces like ceramic clears, E-coated panels, aluminum and composites. The strong, yet flexible backing provides long life and resists tearing to get the full life out of every disc.

Applications:

• Paint removal
• Primer removal
• Sanding between coats of paint
• Sanding hard-to-sand surfaces like ceramic clears, E-coated panels, aluminum and composites

Benefits:

• Innovative cut hole-pattern maximizes performance
• Nearly twice as many holes as the original multi-air design to better target dust
• Patented design retains a higher percentage of abrasive coverage compared to the original multi-air
• Does not need to be lined up with the holes on the back-up pad to achieve optimal performance so changeover is fast and easy
• Best results will be achieved using a vac-assist random orbital sander

How to Use:

1. Attach the disc to a vac-assist random orbital sander.
2. Start the sander and begin sanding the surface.
3. Change the disc when it becomes dull.

Cautions:

• Wear eye protection when using this product.
• Do not sand in the direction of the grain.
• Do not sand over sharp edges or corners.
• Do not sand wet surfaces.

Storage:

Store the discs in a cool, dry place.