Dana/Eaton Roadranger w/ PLC Application Card for the Pro-Link P

System Coverage:

• Eaton AutoShift/AutoSelect GEN 1
• Eaton ABS -Anti-lock brake system
• Dana TMS - Tire management system
• Eaton VORAD CWS
• Eaton Top 2
• Ceemat transmission
• Power Line Carrier (PLC) Test application for trailer ABS
• Includes: Application Card and Manual.

Features:

Eaton Autoshift/Autoselect Gen 1

• Display and clear active intermittent fault codes.
• Monitor AutoShift/AutoSelect system data.
• Displays:
  • Transmission make
  • Model
  • Serial number
  • System application
  • System configuration
  • Transmission application
  • Transmission configuration

PCMCIA

• The Roadranger application software provides coverage for Roadranger products including Eaton ABS and electronic transmissions, the VORAD collision warning system, and Dana Tire Management Systems. To address advanced capabilities provided by the Roadranger products the MPC uses a PCMCIA card. The card is plugged into the back of the unit and provides additional information unique to Dana/Eaton products.

Eaton ABS - Anti-Lock Brake System

• Covers truck/tractor and trailer systems
• CTIS - Mobility systems
• Dana Eaton Roadranger ABS PCMCIA card floppy disk update
• Display and clear active and historical fault codes
• Display and clear active and intermittent fault codes
• Display and clear active and intermittent fault codes
• Displays transmission make, model, serial number, shift counts
• Displays vehicle data functions
• Generation 3 Gamma ABS, Generation 4 ABS, Generation 5 ABS w/PLC
• Lockout solenoid CEEMAT TRANSMISSION
• Modify system/data EATON VORAD CWS
• Monitor CEEMAT system data
• Monitor system inputs
• Monitor systems
• Need to update your existing Dana Eaton Roadranger card?
• PCS - Mobility systems
• Perform diagnostic tests
• Perform system diagnostics
• Perform system tests EATON TOP 2
• Perform tests on vehicle interface, shift lever, throttle dip test,engine brake, air system and hydraulic system

PN 802001F Power Line Carrier (PLC) Test Application 1 for Trailer ABS

• Effective March 2001, a Federal Government mandate required that heavy-duty trucks have an in-cab trailer ABS warning lamp. Using a new SAE standard called PLC communication, the change requires trailer ABS ECU's to communicate with the tractor ECU via the J560 power line activate the warning lamp. NEXIQ's PLC Converter (sold separately) is also required for PLC communication. The PLC test application is easy use and provides the ability to:
  • Read service codes
  • Reset system configuration

Dana TMS - Tire Management System

• All tire management systems covered in one application!
• Shift solenoid
• Test system components
• Test Top 2 solenoids
• Test tractor and trailer coupled or trailer independently for MID messages. Requires NEXIQ PLC Converter Kit (PN 601020)
• Tire maintenance system
• Tire monitor system
• Toggle in-cab trailer ABS warning lamp ON/OFF to confirm operation
• Verify trailer ABS ECU for MID 10 and MID 11 messages
• View and clear fault codes
• View system information