Installer Saab 9-7X, 2014 Silverado/Sierra

The Kent-Moore J-22828 Installer is a tool used to install pinion bearings on Saab 9-7X and 2014 Silverado/Sierra vehicles with 9.76" rear axles.

The pinion bearing is pressed into place over the selective shim in order to position the pinion correctly in the axle carrier housing. All service bearings for 8.6" axles from 1999 to 2009 are those used on 2007-current C/K trucks. The bearing must be installed over the length of the pinion shaft, and seated against the shim. J-22828 and a hydraulic press are used to install this bearing without contacting the bearing roller cage.

Key Features:

• Used to install pinion bearings on Saab 9-7X and 2014 Silverado/Sierra vehicles with 9.76" rear axles
• Presses bearing into place over selective shim
• Prevents contact with bearing roller cage

Applications:

• Saab 9-7X All Years
• 2014 Silverado/Sierra 9.76" rear axle

Benefits:

• Prevents damage to bearing roller cage
• Ensures proper installation of pinion bearing
• Quick and easy to use

To learn more about the Kent-Moore J-22828 Installer, please visit our website or contact us at service@toolsource.com.