Features:
- Precision tooling replaces torch & hammer methods to remove king pins & anchor pins from most models of trucks & buses.
- When servicing king pins, this unit is quickly mounted on the front axle ... a unique "swinging gate" feature makes setup easy.
- Both straight & tapered king pins may be serviced.
- Five special collars & two pins accommodate king pins of 7/8" to 2" in diameter & up to 11 1/4" long.
- With tooling in position, up to 30 tons of hydraulic force is applied ... even the most tightly "frozen" king pin is eased out.
- A job that could consume the better part of a work day is done in minutes.
- With the special anchor pin adapter installed in the pusher`s base block, & the unit properly positioned over the brake spider, the anchor pin can be quickly & easily pressed out.
- The unit measures 27 1/2" high x 8 1/2" wide.
- Made in U.S.A.
- Includes King pin & anchor pin pusher & anchor pin adapter without hydraulics.
- Weight: 59 lbs. 3 oz.
OTC 4241 King Pin & Anchor Pin Pusher w/ Anchor Pin Adapter Only
.gif "Shark"){kind=small}
Follow us on social media