Slide Hammer Dent Pulling Set

KD Tools 2290 Slide Hammer Dent Pulling Set Features:

\r\n
• Tool pulls dented sheet metal back into place.
\r\n
• To use, drill a hole in the deepest part of the dent, insert the hook or self-threading screw tip and tap lightly with the 2-1/2lb slide hammer to remove the dent.
\r\n
• A 13"-long shaft enables high pulling force.
\r\n
• Slide hammer has 1/2-13 UNC thread.
\r\n

KD Tools 2290 Slide Hammer Dent Pulling Set