Motorcycle Tire Changer Machine RC-200/EX

The Ultimate Tire Changer for Motorcycles, Choppers and ATVs!

Custom Engineered, 3-Position Motorcycle Rim Clamps
The COATS RC-200/EX tire changer features newly designed motorcycle rim clamps that provide extra clearance for sprockets and your choice of three optimized positions. The RC-200/EX can clamp rims up to 23" and they work just as well for smaller ATV rims down to 6" so you can handle virtually any wheel that rolls in.

Superior Bead Loosening System
Optimized for motorcycle wheels with a contoured pad and back-up system. Two positions for wide chopper tires or very narrow tires to minimize the risk of wheel damage during service.

Powerful "Extra Hands" To Do Most of the Work
The Robo-Arm provides extra power for flexing stiff sidewalls. Manual drop center aid also reduces effort needed for tough tires so your Technicians can concentrate on efficiency.

Complete Protection for Expensive, Delicate Wheels
The COATS RC-200/EX tire chaneger provides protection for wheels at every step of the process. Bead loosener socks, clamp booties, and lift tool protection help prevent metal-to-metal contact that causes scratching or marring.

Specifications:

• Wheels Handled Motorcycle, ATV, some automotive
• Shape of Tabletop "X" shaped for rigid perimeter support of the wheel
• Wheel Clamping Method Four custom, 3 position, self centering Rim Clamps on table top actuated by a pneumatic cylinder
• Bead Loosening System Foot control actuates 8" dual action cylinder and sculpted blade
• Electric Drive System 110v, 15A single phase
• Pressure Limiter Standard
• Bead Seating Reservoir 3.8 gal. tank, pressure protected
• Inflation Gauge Easily calibrated 0 to 60 PSI gauge with protection to 200 PSI. Damage resistant Lexan faceplate
• Filter Lubricator Standard with automatic drain and large capacity lubricator bowl
• Rim Diameter 6" to 23"
• Maximum Rim Width 12.5", 14" with optional car clamps
• Maximum Tire Diameter 50"
• Required Air Source 110 to 175 PSI 2HP compressor, 5 SCFM at 150 PSI
• Operating Footprint 49" W x 48" D x 76" H
• Shipping Weight 700 lbs.

$85 standard freight fee.

Ammco-Coats RC-200/EX Motorcycle Tire Changer Machine