Access Valve Core Remover/Installer

Robinair Access Valve Core Remover/Installer (18132)

This handy tool removes valve cores without losing the system charge. Designed specifically for use during evacuation or recharging of any system with valve core-type access port.

Valve core removers/installers cut service time for these procedures in half. By removing the core, restriction is eliminated and maximum flow results, greatly reducing the time required for pull down and recharging.

Can be used to replace leaky valve cores while the system is under pressure. Just attach tool to the access fitting and unscrew the core. When you`re done, close off the system and replace the valve core.

Designed for automotive access fittings with deeper valve cores.

Key Features:

• Removes valve cores without losing the system charge
• Designed specifically for use during evacuation or recharging of any system with valve core-type access port
• Cuts service time for these procedures in half
• Can be used to replace leaky valve cores while the system is under pressure
• Designed for automotive access fittings with deeper valve cores

Applications:

• Evacuation and recharging of any system with valve core-type access port
• Replacing leaky valve cores while the system is under pressure

Benefits:

• Saves time and money by reducing service time
• Prevents loss of system charge
• Allows for replacement of leaky valve cores while the system is under pressure
• Designed for automotive access fittings with deeper valve cores