.3110" Solid Carbide Reamer

.3110" Solid Carbide Reamer | 1150

These unique reamers feature a 2" long pilot for perfect alignment with the valve guide while reaming. With these reamers you can expect to ream a valve guide to exact dimensions without any taper in just a few seconds.

JIMS® Manganese-Bronze valve guide reaming instructions

A. Install the cylinder head in a vise. Protect the cylinder head with a clean towel or rag, as pictured. B. Insert the reamer pilot in the guide and lubricate with a good quality cutting oil like K-Line Bronze Reamer Lube. (Fig.1) C. Ream at 100-200 RPM with a slow feed rate. Let the reamer do the work and do not force the reamer. (Fig.2) D. After reaming all the way through, pull the reamer out without stopping the rotation. (DO NOT reverse rotation!) E. Clean the chips off the reamer and you're ready for the next valve guide.

Warning: Always wear proper safety equipment when working!

Key Features:

• 2" long pilot for perfect alignment with the valve guide
• Reams valve guides to exact dimensions without any taper
• Reaming takes just a few seconds

Applications:

• Ream valve guides in cylinder heads

Benefits:

• Quick and easy to use
• Produces accurate results
• Extends the life of valve guides

Order your .3110" Solid Carbide Reamer today and see the difference!