.3777" Solid Carbide Reamer

JIMS USA | .3777" Solid Carbide Reamer | 1155 | .3777" Solid Carbide Reamer 1155

These unique reamers feature a 2" long pilot for perfect alignment with the valve guide while reaming. With these reamers you can expect to ream a valve guide to exact dimensions without any taper in just a few seconds.

Key Features

• Solid carbide construction for long life
• 2" long pilot for perfect alignment
• Reams to exact dimensions without taper
• Quick and easy to use

Applications

• Ream valve guides in cylinder heads
• Ream other small diameter holes

Benefits

• Extends the life of valve guides
• Improves engine performance
• Prevents leaks and other problems
• Makes valve adjustments easier

Instructions for Use

1. Install the cylinder head in a vise. Protect the cylinder head with a clean towel or rag, as pictured.
2. Insert the reamer pilot in the guide and lubricate with a good quality cutting oil like K-Line Bronze Reamer Lube. (Fig.1)
3. Ream at 100-200 RPM with a slow feed rate. Let the reamer do the work and do not force the reamer. (Fig.2)
4. After reaming all the way through, pull the reamer out without stopping the rotation. (DO NOT reverse rotation!)
5. Clean the chips off the reamer and you're ready for the next valve guide.

Warning: Always wear proper safety equipment when working!

Order your JIMS USA .3777" Solid Carbide Reamer today and see the difference!