Product Description
The JIMS USA Cam Bearing Gauge 2249 is a set of two go/no-go gauges used to check the inside diameter of the inner cam bearing on all Big Twin 1958-present single cam engines. The gauges are made of hardened steel and feature a black oxide finish for corrosion resistance. The go gauge has a slightly larger diameter than the no-go gauge, and is used to check if the cam is too tight. The no-go gauge has a slightly smaller diameter than the go gauge, and is used to check if the cam is too loose.
Key Features
- Set of two go/no-go gauges
- Hardened steel construction
- Black oxide finish for corrosion resistance
- Precise measurements
Applications
- All Big Twin 1958-present single cam engines
Benefits
- Ensures that the cam is properly installed
- Prevents damage to the cam and bearing
- Extends the life of the engine
Usage Instructions
- Align the cam bearing with the go/no-go gauge.
- If the cam bearing fits snugly on the go gauge, it is the correct size.
- If the cam bearing does not fit on the go gauge, it is too tight.
- If the cam bearing fits loosely on the no-go gauge, it is too loose.
Troubleshooting
If the cam bearing is too tight, it can cause damage to the end of the journal and other problems with the cam. If the cam bearing is too loose, it can rock fore and aft causing noise and unnecessary cam, bearing, and roller wear.
Contact Us
If you have any questions about the JIMS USA Cam Bearing Gauge 2249, please contact us at
Follow us on social media