Fabricator 251 Welding System

The Fabricator 251 is a 208-230 Volt integrated MIG machine with a best in class performance of 300 Amp maximum output @40% of duty cycle (250 Amp @ 60%) 24 voltage steps, spool gun operation on demand, digital meters and spot/stitch timers. Fabricator 251 comes with: Power cord and plug, 15ft (4.5m), 300 Amp TWECO(R) WeldSkill MIG gun, 10ft (3m) work cable and clamp, Gas regulator/flowmeter, Factory fitted cylinder rack & wheeling kit, .035"/.045" reversible drive roll, Cable storage hook and Comprehensive weld set-up chart. The Fabricator 251 is also extremely versatile with an optimized low end performance for .023" (0.6mm) down to 20 Amps and a top end of 300 Amps to comfortable run 1/16" (1.6mm) wires. Fabricator 251 is the ideal choice for sheetmetal work, training schools and light to medium fabrication up to 5/8" plate.

• New 24 voltage taps - providing a wider operating range of 20 to 300 Amp with an extremely smooth and stable arc characteristic
• Higher Output - the Fabricator 251 now punches out 300 Amp maximum output at 40% duty cycle
• Spool Gun Ready - new factory fitted "run ready" with 10 pin receptacle, just "plug and play"
• New dual cylinder rack as standard - drop down twin cylinder rack allows for easy cylinder mounting
• Quick change polarity - simple, quick change (no tools required) polarity and spool gun change-over from the front of the power source

Victor Firepower 100048D-002H Fabricator 251 Welding System