Nylon Opaque Rod 5003R6 30 Ft

Urethane Supply Company | Nylon Opaque Rod 5003R6 30 Ft | R06-01-03-NT | Same as previous part number 5003R6

• Weight: 0.20 LB
• Length: 360.00 IN
• Height: 0.13 IN
• Width: 0.13 IN

Nylon is a very high melting point plastic and is used in places where high temperatures are present, like radiator tanks and intake manifolds. Nylon has a very distinct smell when melted. Because of the high melting point of nylon, it is often necessary to preheat the area you are going to weld with a heat gun. This will make welding much quicker. Becasue of the pressure and temperatures on nylon radiator tanks, it is very important that the rod fuse with the base material. Anything less than a complete fusion repair will result in a money-losing comeback job.

• This nylon rod measures 30 ft. (9.1 m) long and 1/8th inch (3 mm) in diameter and works with Urethane Supply Company's Airless Plastic Welder or hot air plastic welder.

Key Features

• High melting point plastic
• Used in places with high temperatures
• Distinct smell when melted
• Must preheat area before welding
• Must fuse with base material for a complete repair
• Measures 30 ft. (9.1 m) long and 1/8th inch (3 mm) in diameter

Applications

• Radiator tanks
• Intake manifolds

Benefits

• High melting point makes it ideal for use in high-temperature applications
• Distinct smell helps you identify the melted nylon
• Preheats quickly for faster welding
• Fuses with base material for a complete repair
• Long length and small diameter make it easy to use